KONICA-MINOLTA EV-jetsetters 3100S(3100H), 5100S(5100H).


Features & Advantages:

Specifications


Imaging Width: 18.157" (461.2 mm); 18" (457.2 mm); 14.157" (359.6mm); 14" (335.6 mm); 12.157" (308.7 mm), 12" (304.8 mm).

Resolutions/
Speed:
EV-3100S/
EV-5100S
from 5.29"/min to 32"/min (resolution dependent - from 3556 dpi to 1000 dpi).

EV-3100H/
EV-5100H
from 4.5"min to 16"/min (resolution dependent - from 3048 dpi to 1000 dpi).

Recording source: 10mW Visible Red Laser Diode (670nm recording wavelength)

Spot Size: 20 - 35 microns (resolution dependent) measured at the film plane

Repeatability: EV-3100S/
EV-3100H
.0012" (.03 mm) typical over six 14" x 18" separations. May vary according to media, media packaging and processing conditions.

EV-5100S/
EV-5100H
.0012" (.03 mm) typical over six 18" x 24" separations. May vary according to media, media packaging and processing conditions.

Density Uniformity: Within .3D on 100% dot.

Output Media: Visible Red Laser sensitive film, paper or polyester plate material (.004" to .008" thick) emulsion in, rolled on 2" I.D. heavy duty core. Break away tape to core. Roll capacity up to 400 ft (120 m). Maximum outside diameter: 5.7" (145 mm). Supply cassettes are dark room loaded (green safety light); capacity one roll. Adjustable to selected widths between 18.1" (460 mm) and 12" (305 mm). Standard supply cassette accepts material widths of: 12"(305 mm), 13" (330 mm), 13.3" (338 mm), 14" (336 mm), 14.52" (369 mm), 15.35" (390 mm), 15.75" (400 mm), 16" (406 mm), 16.93" (430 mm), 17.75" (450 mm), 18" (457 mm), 18.1" (460 mm).

Take-up cassette: Capacity 25' (7.6 m) 4-mil film and polyester plate 20'(6.1 m) paper, 7-mil material (plate or film) requires an on-line processor or optional plate cassette (12' capacity)

Operating Conditions: 62 F to 86 F(17 to 30 C). Relative humidity 45-65%, non-condensing. Relative humidity outside this range may affect imagesetter performance.

Storage Conditions: 0 F to 130 F(-18 to 54 C); temperature change not to exceed 25 F (14 C) per hour.

Dimensions: 28"W x 40.5"D x 18"H (711 mm x 1029 mm x 457 mm), 150 lbs(68 Kg)

Power: 110/115/230V(+/- 10%), 1.7/1.5/1.0 A, 50/60 Hz, single phase

On-line Processor
Configuration:
Use Konica On-line 3100 with transport bridge

return to KONICA info page Next...